Rm-materials-handling VARIABLE SPEED CONTROLS ControlMaster NXT Service Manual de usuario descargar pdf (Pagina 33)

R&M Materials Handling, Inc.

4501 Gateway Boulevard

Springfield, Ohio 45502

P.: (937) 328-5100

FAX: (937) 325

5319

33/53

R&M Materials Handling, Inc. reserves the right to alter or amend the above information without notice.

5.3 Switch settings on chain hoist lifting application

The chain hoist lifting application is activated with switch group S10. The switches must be set according to the

descriptions in the following section.

5.3.1 S10 -2 Chain hoist lifting application

The switch S10 – 2 activates the chain hoist lifting application.

Switch S10- 2 Chain hoist lifting application

0 The chain hoist lifting application is not active.

1 The chain hoist lifting application is active.

Note: The setting shall be used for lifting applications only.

5.3.2 S6 U/f curve settings on chain hoist lifting application

Switch S6 U/f curve settings

-1 -2 -3 Zero Freq Volt [%] U/f Mid Volt [%]

1 1 1 8.5 16

The intermediate point is 5.5 % of the motor’s nominal frequency.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 52 53

Sin comentarios

Rm-materials-handling VARIABLE SPEED CONTROLS ControlMaster NXT Service Manual de usuario Pagina 33