Rm-materials-handling WIRE ROPE HOISTS Service Manual de usuario descargar pdf (Pagina 28)

R&M Materials Handling, Inc.

4501 Gateway Boulevard

Springfield, Ohio 45502

P.: (937) 328-5100

FAX: (937) 325-5319

28/130

R&M Materials Handling, Inc. reserves the right to alter or amend the above information without notice.

- Drive pinion of the gear fits correctly into the gear-rim of the drum. Rotate the motor’s shaft on the brake-end

side to guide the pinion into the gear-rim and to check the right fitting.

• Fasten the bolts B & D.

• Remove the thread bars and fasten the bolts A & C.

• Tighten the bolts to the correct torque.

• Re-assemble the hoist limit switch.

• Insert the brake wires into the plug and re-connect the power feed connector.

• Tighten the brake fixing screws.

• Remove the drum-locking device (wooden wedge).

• Re-assemble the protective cover of the hoisting machinery.

• Test the proper operation of all movements and functions

! In many cases it is necessary to re-adjust the limit switch. Be aware of incorrect settings

during testing the operation.

Drum size ø 608 mm

In the models with drum size ø 608mm, the motor(s) can be extracted from the gearbox separately.

c_r3hm1c

1. Hoisting limit switch

2. Cover hoisting limit switch

3. Connection box

4. Drum-bearing house

5. Fixing plate for gearbox

6. Fixing screws for gearbox

7. Hoisting gearbox

8. Coupling.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 129 130

Sin comentarios

Rm-materials-handling WIRE ROPE HOISTS Service Manual de usuario Pagina 28