Rm-materials-handling WIRE ROPE HOISTS Service Manual de usuario descargar pdf (Pagina 40)

R&M Materials Handling, Inc.

4501 Gateway Boulevard

Springfield, Ohio 45502

P.: (937) 328-5100

FAX: (937) 325-5319

40/130

R&M Materials Handling, Inc. reserves the right to alter or amend the above information without notice.

5.14.2 Assembly

1. Hoist limit switch

2. Connection-box cover

3. Fixing screws limit switch

Disassembly:

• Switch OFF the power supply to the hoist.

• Remove the connection-box cover (2).

• Remove the wires from the limit switch.

• Remove the fixing screws (3).

• Extract the limit switch (1).

Re-assembly:

• Fit the limit switch carefully in its place, so that the pinion fits into the gear-rim of the drum.

• Tighten the fixing screws (3)

• Re-connect the wires.

• Switch ON the power supply to the hoist and check the proper functioning of the limit switch.

! In many cases it is necessary to re-adjust the limit switch. Be aware of incorrect settings

during testing the operation.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 129 130

Sin comentarios

Rm-materials-handling WIRE ROPE HOISTS Service Manual de usuario Pagina 40